Access internal network from ESXi host?
Hi, is it possible to access the internal virtual network from the ESXi host? 'In XenServer I used to add a secondary IP address to the host's NIC so I could use a Samba file server VM as a "CIFS ISO...
View ArticleRe: Resetting HardwareStatus via PowerCLI
You would probably want to write that more along the lines of the below: $user = "root"$password = "Password"$vmhosts = Get-VMHost | Select NameForeach ($vmhost in $vmhosts){ Write-Host "Processing...
View ArticleRe: vSphere losing connection to VMs
And you think it would cause it to drop network, and not just freeze up? If that is the case, it's worth a shot, as I am upgrading any who, but I wasn't even thinking it could be that.
View ArticleRe: My VMWare Fusion Will NOT Load - PLEASE HELP!!!!
Please ensure that the Windows which you have moved to external drive has all the data and apps and nothing is missing.Proceed only if you have confirmed it. I suggest you delete the bundle present in...
View ArticleRe: Manually remove vSphere Client (ESXi 5.1) from a crashed vSphere Server 5...
Hi, Before I tried it, I did a recovery of the OS from a point at which vCentre had been removed. Re-installed vCentre and then added the hosts back into it. There were a couple of warnings with the...
View ArticleRe: vCenter Server Appliance 5.1 - Wizard/Config fails
Hello Guys,I go the same same problem but still not able to get a vmware server appliance over vmware workstation 8.0 when deploying the wizzard I getover database and sso field: Failed to execute...
View ArticleRe: Assessment Report - 5.3 Detailed Placement Results
Did you add the systems the project . On Administration tab my Projects Select the project name edit and click on systems select the systems click apply ok .
View ArticleRe: How to add non vSphere source?
I have added some iDRAC and my EqualLogic Group and i can see the log entries in vCenter Log Insight. You have to create a filter based on "source" and choose "start with" to search for IP, or when you...
View ArticleVMware Horizon Mail - Error: Connection error
I have purchased VMware Horizon Mail but have never been able to get it to work with Exchange 2010 ActiveSync. I configure the default Android Mail application just fine. The only error I get is:...
View ArticleRe: Strange error on Linux Server - ksh[2341]: .: ../aogconfigperf.sh: cannot...
Im able to execute the commands locally without password. our client they have power broker configured which allows us to execute only commands which are needed.i Think the host has issue bcos all the...
View ArticleRe: Assessment Report - 5.3 Detailed Placement Results
Yes, Few minutes ago I entered into "View Optimization Scenario" inside the project and modified "***Business as Usual"I've changed the Type from "Desktop Consolidation" to "Server Consolidation"......
View ArticleRe: host loses connectivity after adding to dvswitch
I keep losing connectivity to the esxi host when i move my management vmknic into the vsphee 5.1 dvs.I did enable lacp on the 5.1 vsphere switch and set load balancing policy to ip hash. I moved one...
View ArticleRe: Unable to get Class of Service
Hi, Can you please enable additional log level in data-va and re-do the same use case? In /opt/zimbra/conf/log4j.properties.in , add the line - log4j.logger.hzndata.auth=TRACE at the end. Then,...
View ArticleRe: Access internal network from ESXi host?
You can add VMkernel interfaces to your vSwitches (this would be the additional IP addresses in the Xen Server), but you can t map CIFS shares on the ESX server - you can try to do the same thing with...
View ArticleRe: Lync 2013 VDI plugin only works with RDP protocol
Hi, I have written the following Horizon View 5.2 Microsoft Lync 2013 VDI installation/configuration guide. Please follow the steps here and let me know how it goes. The ABCs of Deploying VMware...
View ArticleRe: View 5.2 and Serial Port
Hi,Today, we don't support Com Serial Redirection with PCoIP. It is available when RDP is used though. Some customers have successfully used USB-to-Serial adaptors to get this working. Thanks
View ArticleRe: Lync 2013 VDI plugin only works with RDP protocol
Hi Tony, Thanks for the article! I have reviewed it several times but it doesn't help me resolve the issue. Is there perhaps some deep level logging I can turn on to view what is happening with the...
View ArticleRe: USB redirection not working
Can you give us more information? What version of the View agent and View client are you using? Can you clarify what the exact USB devices are? Thanks
View ArticleRe: vmotion between clusters
Hi Frank, Well this is a bit embarrassing. It was the incorrect tagging on the switch port. I had a lightbulb moment when i could no longer vMotion between hosts within the VSA cluster itself. After...
View Article